WL型系列立式排污泵结构特点

WL型系列立式无堵塞排污泵为单吸窝壳式泵，泵内装有无堵塞防缠绕型单（双）大流道叶轮，泵体和进水管上都设有手孔，以供排除杂物。液体沿轴向吸入，水平方向排出。电机与泵的联接有两种方式，一是电机装在与泵体连为一体的支架上，二是电机单独设基础通过加长轴与泵轴联接。 从电机上方看，泵顺时针方向旋转。 出口法兰上备有安装压力表的管螺孔，用户可在此安装压力表，以测定泵运行时的出水压力。 上轴承盖和轴承架上装有旋盖式油杯，以便补充轴承体内的润滑脂。

WL series vertical non-clogging sewage pump suction fossa as a single shell pump, pump built-in availability of blocking anti-wound single (double) pandemic Road, impeller, pump body and into the water pipes are equipped with hand-holes for exclusion debris. Inhalation of the liquid along the axis, the horizontal direction of emission. Motor and pump connection in two ways, one motor and pump mounted on the bracket as a single entity, the second is the basis set by adding a separate motor axis connected with the shaft. View from the top of the motor pump rotates clockwise. Install pressure gauge on the outlet flange of the pipe with screw, the user can install the pressure gauge at this to determine when the water pressure pump is running. On the bearing cap and bearing the shelves with screw-cap-type oil-cup, in order to supplement the body bearing grease.